Contact Information

Address: Jai Ganesh Vision, 3rd Floor, Jai Ganesh Vision Building, Akurdi, Pune, Maharashtra, India, 411035
Country: [India]
Phone: - - 91-20-40710005
Mobile: - 9860001144
Fax: - - 91-20-40710009
home products Agitated Thin Film Evaporators With Centrifugal Blade Rotor

Agitated Thin Film Evaporators With Centrifugal Blade Rotor

Product Details:

Keywords Chemical Product Machinery, Agitated Thin Film Evaporators With Centrifugal Blade Rotor, , RAJ PROCESS EQUIPMENTS AND SYSTEMS PVT LTD, India
Category Machinery > Chemical Product Machinery 
Payment Terms
Group

Detailed Product Description


Thin film or wiped film evaporators are used to separate a mixture of liquids having different boiling points. It is also used to increase the concentration of liquids.

Principle of Operation
The liquid feed is distributed on the heated wall of the evaporator to form a uniform thin film with the help of suitable configuration of blades. The volatile component or the component with lower boiling point gets evaporated and is vacuumed out of the evaporator, while the component with higher boiling point flows down the wall and is collected at the bottom. The vapours are passed through a condenser and collected separately.

Operating Features
The heat transfer in thin film evaporator is very quick and efficient, thus demanding lower surface area and heat input as compared to other types of evaporator. Due to high vacuum distillation and very short residence time the thin film evaporator are suitable for handling wide range of heat sensitive, high boiling and viscous feeds. Due to low rotor speeds in the range of 100 to 150rpm, the horse power requirements are very low. To reduce the pressure drop between the evaporator and condenser, the internal condensers can be provided to achieve short path distillation. The thin film evaporators are designed to handle various products with operating pressures up to O.1torr. Liquids with viscosities above 2,00,000cps can be handeled in these evaporators.
        
 
Construction of ATFE

The Agitated Thin Film Evaporator consists of a jacketed shell having a machined surface on the inner side. The rotor assembly consisting of different configuration of blades depending upon the nature of product is mounted in the shell. Feed inlet is provided at the top side. Specially designed feed distributor is integral with the rotor at the top side. The rotor is also fitted with an entrainment separator. Generally the vapour outlet is provided on the top side of the shell. The different types of blade configurations available are:
 
 Fixed blade rotor
 Spring loaded rotor
 Cylindrical wiper rotor
 Centrifugal blade rotor
 

The construction of the evaporator is such that different types of rotors can be mounted in the same equipment for different products. The evaporators having surface area up to 50sq.m. can be supplied.

RAJ Agitated Thin Film Evaporator Models

 
Model Surface
area (m2)
Diameter
(mm.) (D)
Total height
(mm) (H)
Motor
hp.
RE-50.525022502
RE-10135026503
RE-30345035005
RE-50560047507.5
RE-757.5700575010
RE-10010800650015
RE-15015950750020
RE-200201100800025
RE-250251350850030
RE-350351600950040
RE-5005020001100060



Agitated Thin Film Evaporators With Centrifugal Blade Rotor

Home | For Buyers | For Suppliers | Services | My Blazelead | Help
About Us | Advertise with Us | Site Map | Contact Us | Country Search | Premium Suppliers
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z |
Terms & Conditions | Privacy Policy
Copyright ©2010-2011 Blazelead.Com. All Rights Reserved.