Detailed Product Description
The range of tube filling machines are designed for pharmaceutical manufacturing and are filling the tablets into the tubes as they are rotating. This well proven technology is especially suitable for fragile products like effervescent tablets.
These automatic tube filling machines are fully GMP-conform and are available in a capacity range from 10 over 35, 70 and up to 240 tubes/min
The combination of electric drives, PLC, pneumatics and replaceable format-parts reduces set-up time and provides the largest known flexibility range in terms of possible product formats.
All horizontal beams are circular and all surfaces are angular in order to fulfil GMP-requirements. To avoid cables is the control panel integrated in the cabinet and the communication to the different machine modules is done with a Profi-Bus system.
All rotating movements are powered by electric drives in order to reduce sound level, operating cost and maintenance needed.
A lot of the mechanical components are standard components that correspond to international standards. For instance are almost all pneumatic cylinders ISO classified and can be replaced with components of a different brand.
The machines have a very wide format range. With only a few format pars needed can the machines be reset to handle tablets with a diameter from 14 mm up to 33 mm. Further on can the filling machines handle tubes with a length from 50 mm up to 200 mm without any format parts at all needed!
If the machines are set up in line with a tablet press and a secondary packaging machine can the whole line be operated by one person only.
Last but not least are the tube filling machines designed so that the capacity realised from the first day. which is given in the specification also can be