Contact Information

Address: No 4 / 9 1st Cross, 4th Street Shanthipuram, Thirumullaivoil, Chennai, Tamil Nadu, India, 600062
Country: [India]
Phone: - - 91-9430245679
Mobile: -
Fax: - - 91-44-26382710
home products Remote Controlled Switches

Remote Controlled Switches

Product Details:

Place of Origin Tamil Nadu India
Production Capacity 1000 Piece/Pieces per Month  Per 
Keywords Remote Control Switches, Remote Controlled Switches, , APOLLO ENTERPRISES, India
Category Electrical Equipment & Supplies > Switches >Remote Control Switches
Payment Terms L/C,T/T,Western Union
Group

Detailed Product Description


Remote Control System for 4 Lights and 1 Fan (with fan Speed Regulation and Display) & with in-built Night Lamp .

Our product features and benefits are listed below for your kind-reference.

Fan Speed Regulation in 10 Steps
Remote Signal Receiving Indication
Power On Indication
All Off Facility
Inbuilt Night Lamp
Built In Memory
Full Function Remote Control
Remote Operating Distance up to 40-70Ft
Reduce Your Electricity Bill by putting off lights and fans immediately with remote control when not needed
It Also Supports Inverter.
Remote operation prevents us from Risk of electric shock and Short Circuit.
No Alteration Required to your existing wiring while installing our unit.
Easy Installation
The Main Advantages of a Remote control system when compared with mechanical switching systems are: -

System saves unnecessary wiring and switches cost of 2 way switching.
Spark less and contact less switching increases switches life.
Prevents children from risk of electric shock and short circuit.
It is a boon for physically handicapped persons.
Can be installed in all hospital rooms used for bed ridden patients.
All bed rooms used by elderly and aged people
This Remote Control System can be used in any:

House,

Office,

Restaurants,

Shops,

Hospitals & Conference or

Seminar Halls, Etc...

Highly Useful For :-

All Homes Particularly at Bed rooms and Halls,
Children where switchboard is not reachable ,
Auditoriums and conference halls ,
Bedridden patience and aged people,
Physically handicapped persons,
Hospitals and clinics .
Star Hotels, Shops, Restaurants Etc.
Specifications:-

Operating Voltage 180-280 Volts AC
Frequency 50 Hz
Load Capacity each switch - 600 Watts
InfraRed Based Remote Control
Remote Control Working range 40-70 Feet
Use Two "AA" Size batteries for remote control


The total Remote control System comprises of following parts:

· Sensor / receiver unit - To be fixed at the place provided for switch board.

· Remote Control - Hand held unit for switching on/off

· Required Set of screws

· Installation Manual - wiring instructions explaining easy installation

· Warranty Card - for customer satisfaction and after sales service

· Plastic Box for Packing - Safety & Proper enclosure for all above 4 items

The general and Standard Modules available in Modular /Manual switch board are:-

4 Module (Accommodates 4 Switches space in a single Row only)
6 Modules (Accommodates 6 Switches space in a single Row)
8 Modules (Accommodates 8 Switches space in a single Row)
4+4 Module (Accommodates 4 switches space at the top and 4 switches space at the bottom)
6+6 Module (Accommodates 6 switches space at the top and 6 switches space at the bottom)
Sensor Unit Measurements:-



The measurements of our sensor unit/ Base unit are same as your regular/standard modular switch board. you can just fit it and screw it into the space provided for modular switch Board.

4 Module :- Screw to Screw Distance = 12 Cms & Outer Frame size = 14.7 cms Length x 8.7 cms width
6 Module :- Screw to Screw Distance = 19.5 cms / 7.75 Inches & Outer Frame size = 8.25" x 3" (or) 21 cms x 7.6 cms
8 Module :- Screw to Screw Distance = 6.25" / 16 cms & Outer Frame size = 9.75" x 3.25"
4+4 Module :- Screw to Screw Distance = 12 Cms / 4.75" & Top to Bottom screw length = 6 cms & Outer Frame size = 5.5" x 5.5"
6+6 Module :- Screw to Screw Distance = 7.5" & Top to Bottom screw length = 6.75 cms & Outer Frame size = 8.25" x 5.5"
Installation Procedure:-

The sensor/receiver unit is installed in to the existing space provided for modular switch board according to the procedure explained in the Instruction manual.

The hand held remote is then loaded with 2 AA size batteries and the unit is now ready for operation within 40-70 ft range.



Remote Controlled Switches

Home | For Buyers | For Suppliers | Services | My Blazelead | Help
About Us | Advertise with Us | Site Map | Contact Us | Country Search | Premium Suppliers
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z |
Terms & Conditions | Privacy Policy
Copyright ©2010-2011 Blazelead.Com. All Rights Reserved.