Contact Information

Address: SF 17 / 18, Kalangal Road, Sulur Via, Coimbatore, Tamil Nadu, India, 641402
Country: [India]
Phone: - - 91-422-2689292
Mobile: -
Fax: - - 91-422-2688608
home products Ring Frames-Woolen Yarn

Ring Frames-Woolen Yarn

Product Details:

Keywords Spinning Machinery, Ring Frames-Woolen Yarn, , Sanmarco Texmac Pvt Ltd, India
Category Machinery > Textile Machinery >Spinning Machinery
Payment Terms

Detailed Product Description




Range of application

Long staple worsted spinning

Type of raw materials

Wool( 75/25,65/35,55/45)Wool (100%)/Polyster

Coarsest count

20 NM

Finest count

120 NM

Draft Range

10 to 30

Twist range

200-1650 Twist Per Meter

Doffing type


Ring diameter

48 MM

Ring type

Conical,steel,self lubricating

Ring brand


Fixing of ring

Press fit

Fitting diameter of ring

55 MM

Ring height

9 MM

Spindle gauge

75 MM

Tube length

230 MM to 260 MM

Spindle speed

16000 RPM (max)


Frequency controlled variable speed, tangential belt for every 48 spindles,geared draft

Creel feed package

Rubbing frame bobbins with double end and also Flyer frame bobbin with single end

Length of feeding tubes

300MM from rubbing frame and 450 MM from Flyer frame

Maximum Diameter of feeding tube

280 MM from Rubbing frame and 175 MM from flyer frame

No of creel rows

6 rows with bobbin hangers having inner brake

Creel rods

Suitable for installation of overhead travelling cleaners

Drafting system

3 roller -2 apron with tension device

Top weighing arm

SKF PK1601

Rear top rollers type

SKF LP 314

Middle top rollers type

SKF LP 316

Front top rollers type

SKF LP 314

Rear top rollers cot dimension (MM)


Front top rollers cot dimension (MM)


Rear top roller cot shore

83+/- 5 degree Accotex J490 straight

Front top roller cot shore

83+/- 5 degree Accotex J490 straight

Middle top roller cot shore

80+/-5 degree Accotex J 490

Middle top roller cot dimension (MM)


Middle top roller recess

1 MM

Top apron cradle


Top aprons


Bottom aprons


Bottom rollers diameter

40-32-35 MM chrome plated running in needle bearings

Front top clearer roller

On top weighting arm

Suction system

With individual suction nozzle and one suction duct for both sides

Suction air discharge

In to underground duct

Balloon control ring

For Z or S

Spindle bolster type



The Ring Rail Drive consists of an independant motor driven by a Servo-controlled system . It is also electronically synchronised to the bottom drafting rollers.

Spindle motor is a three phase, 37kw induction motor driven by a frequency converter. This system driven by a single central driving shaft, drives 48 spindles simultaneously (24 per side).

This driving system is fully covered by casing, which saves cleaning over time and ensures greater safety to the operator.  Suction system is equipped with three phase, 5.5KW induction motor for fan and the manual cleaning filtering elements. Consists of a main duct supporting the extractable suction tubes. The sucked air is conveyed to the filter in the headstock The control and monitoring panel is located in the door of the electrial control board.  System is equipped with a set of input,output cards to perform and control the working functions of the Ring spinning frame. User friendly keyboard and A 40X8 character wide,high contrast ,graphic LCD displays provides the below information to the operator. Machine is incorporated with all necessary stop motions (Door switch, Emergency rope switch, crank detection, twist s-z selection error, etc.), to take care of the safety and smooth running. 

Ring Frames-Woolen Yarn

Home | For Buyers | For Suppliers | Services | My Blazelead | Help
About Us | Advertise with Us | Site Map | Contact Us | Country Search | Premium Suppliers
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z |
Terms & Conditions | Privacy Policy
Copyright ©2010-2011 Blazelead.Com. All Rights Reserved.