Detailed Product Description
RUSEATER-RC 500 converts adamantly adhearing rust in to an organo – complex
compound, resulting in the formation of a non-porous and moiture – repelling coating of
good mechanical stability, brasion resistance, bond strength and excellent anti-corrosive
properties. This coating is an ideal base for the subsequent protecting coat of paint.
Brush or dip, as needed.
* The surface to be treated should be free from heavy oil, greace etc.
* Remove loosly adherent rust from the surface, using a wire brush.
•Dip the component in RUSEATER-RC 500 for 2 to 3 minutes. You also apply the chemicals by using a brush.
• Within few minutes, rust would have been converted in to a ferrosoferric coating. Incase the atmosphere is not highly corrosive; the treated surface may be stored even in open yard.
If you wish to paint or give any other coating, rinse the surface with water after a
minimum 24 hours., ensure that the surface is thoroughly free from residual chemical and absolutely dry and then paint.
Concentration: No need to dilute (100% concentration)
Coating Nature:-Dark blackish color coating
Coating : - Inert organo metallic coating.
RESEATER-RC 500 FINDS EXTENSIVE USE IN:
2All type of MS component to improve paint adhesion.
3Equipment generaly exposed to serve atmosphere.
5Chemical plant and petro chemical industries.
6Steel bridges steel work.
7 Offshore and onshore equipments cranes.
8 Marine equipments.
9 Civic engineering, construction (steel reinforcement rods.)
10 Pipes & Steel structurals.
11 Deck frames and Modules, Splash zones.
11 Ship building, Ship repairing.
12 Electricity and gas power stations.