Detailed Product Description
Slitting Line Toolings:-
HR Slitting Knives Spacers & Over Arm Toolings made by us for last 30 years are a users delight giving him 100% satisfaction for all reasons. No edge chipping is the guarantee of our Slitting Knives . Parallelism of both the surfaces within the closest range makes the knife perform to it is very best.
Similarly Spacers too fully hardened and ground to the best tolerances make the Tooled-up Slitting arbor, the Slitting operation total burr free and hassles free operation.
Tube Mill Toolings
Tube Mill Rolls made from conventionally forged material from Ingot Route do not perform well. This is due to the fact the Rolls profile area is having loose grain structure due to poor reduction of the Ingot in most of the cases .Whereas in ESR grade steel the grain structure right from the centre of the round to the OD of the rounds is just perfect and as such in profile are the grain structure is not a problem and as such the rolls made by us never fail (Spall / Crack) Rolls are again all made out of D-2 (MV) grade . Only the Welding Rolls are made out of HDS.
For On Line Tube Cutting Alpha shears, CoC Knives or Friction Saws are made by as below:-
Alpha Shears -From HSS 6/5/2 & M-35
CoC Knives -From HSS - 6/5/2 & M-35
Friction Saw -From SKS 5 (C-Ni-Cr Steel)
To the Total Customer satisfaction.
Circular Knives / Long Knives
Made out ESR Forged / Rolled Sheet Flats & Rounds in M-2 / M-35 / T-4 / D-2 / H-11 / H-13 suitable for all application as per customers drawings - to give trouble free working.